How to Fix ETKA 7.5 PLUS to ETKA 8 Updating Problems

0 Comment

The ETKA Electronic Parts Catalogue software V8.0  has released and unavailable now. The New V2017 ETKA 8 is a full version of the Original VW/SEAT/SKODA/AUDI Electronic Parts Catalogue including the latest updates, which you can install native or virtual [VM] on every Windows 7/8/10 32Bit System.And now ETAK 8 software is for sale at with detailed user guide,see here : ETKA 8 V2017 Electronic Parts Catalogue For VW/Seat/Skoda/Audi.

etka 8.0

The ETKA 8.0 was updated from ETKA 7.5 PLUS and now users can directly update to latest software by following this guide : How to Update ETKA 7.5 Plus to ETKA 8.0 .

In the normal time, it is easy to update to 8.0 software ,but some users still meet some problems in updating ETKA 7.5 Plus to ETKA 8.0,given to this problems,today, BUYOBDII official blog will share a step by steps guide on how to fix ETKA 8.0 updating problems

New ETKA 8 Update Solution i mainly quotated from original post

“Things customers need to prepare

1. You need a working ETKA 7.5 PLUS Installation (Updates min. 1160-686-692-1160)
2. Backup the ETKA Folder (normally on Drive C:\) – then you will have a Fallback Solution
3. Copy setup.exe and ETKA8_Installation.exe from the archive in the ETKA Folder (normally C:\ETKA)
– Needed File in the attached link: ETKA8_Update_Solution.rar ,you can download it here :!RUUiiApb!1k827zQzoBLGvxY0KEv6ngWBW3uPKsgFCT4YsfH7syw
4. Start setup.exe and push the “Patch it” Button – If the process was successful you will get a “Successfully patched!” message.
5. If the system is “Successfully patched!”, start ETKA8_Installation.exe and wait until the update process is finished.

If the “Patch it”-Button of setup.exe is greyed out, one of the following requirements is not fulfilled:

In the Button you see the message:

– Already installed. – ETKA 8 is already installed or you tried it before
– No ETKA Files found – You didn’t start setup.exe from ETKA Folder
– Already patched. – You already patched the files before (continue with ETKA8_Installation.exe)

In the message box you see the message:

– Can’t patch your System. – no writing access to the files (close ETKA or run the programm as administrator)
– Already installed. – ETKA 8 is already installed or you tried it before
– Please rename this File to setup.exe, otherwise it will not work! – you are not allowed to remame the setup.exe files, undo the name change
– This Software require min. Windows 7. – You have to use Windows 7 or 10, ealier Windows versions will not work.”


Tags: , , , ,

Leave a Reply