How to solve BMW INPA K+CAN driver Problem
BMW INPA Software Free Download:
Below list the free download link collect form internet,if you find the link is invalid,pls tell me.
INPA 6.4.3 Full.rar (thegrayshadow.com)
INPA 6.4.3 Full.rar (mediafire.com)
INPA Software (mediafire.com)
INPA 5.0.6 rar (thegrayshadow.com)
INPA ediabas 5.02 download (tested ok)
Customer feedback : My BMW had ASC/ABS and Brake pads light on … I checked and one sensor from brake pads was broken, then I changed the sensor but still had a ASC/ABS and hand Brake led on……If I leave the car without battery one night, the led will go off , but will come on again randomly.
Then I bought an BMW K+DCan for 17USD and I can´t install the driver , my laptop is Samsung R510… Inpa and Ediabas work Fine … I installed win xp and didn´t work so I changed the HDD whit windows 7 x64 to give a try… But same problem.
I tried to install CDM v2.12.00 WHQL Certified.exe, run it as administrator, run it in win xp sp3 but nothing.
I tryed the manual method, but windows say “can´t find anything in that folder” (I downloaded the older version of driver and Unrar it 2.04)
this is my cable:
I right click on the USB/UART device and go to properties, then the details tab, and look at the hardware ID, it is
USB\VID_0403&PID_0000&REV_0600 Auto Repair
You can fix it by going to the downloaded driver files, and into the ftdibus.inf and ftdiport.inf files.
Scroll down and you’ll see a list of the VID and PID data, you can edit the PID stuff to read 0000 like your lead, and then reinstall it, so find every instance of “PID_6001” and change it to “PID_0000” which should mean that the driver will recognise and accept the lead to work with.
Website : www.buyobdii.com
Tags: BMW Diagnostic Tool, BMW INPA, BMW INPA K+CAN, INPA K+CAN