How to use 2017 BMW ICOM A2+B+C Diagnostic Tool

0 Comment

BMW ICOM A2 can support multi-language and how to use 2017 BMW ICOM A2+B+C Diagnostic Tool

WIFI BMW ICOM E-sys Password:12345678

BMW ICOM A2+B+C Diagnostic & Programming Tool

1.How to install windows language package
Mount c:\nasshare\mu_windows_8_1_language_pack_x64_dvd_2706084.iso
windows_key+r to input: lpksetup
Select language to install

2.Steps on BMW ICOM A2 WIFI setting
1.Use network cable and Connect ICOM to OBD,ICOM will power on
2.Use Itool Radar to get your ICOM ip address.
3.Open IE and input your icom ip in url,like:
Then you can see like picture ICOM-Ax-Info.png
4.Enter <WLAN Settings> you can see like ICOM-WLAN.png.

  • If your ICOM WLAN MAC is not null,it has wifi model.
  • If you use our USB wifi dongle,your need to setting icom wlan info like ICOM-WLAN.png
  • If you use your own workshop wifi,so you need to input your wifi’s SSID,Security Type And Pre-sheared Key.
    Attention:Mode must be <802.11n,2.4GHz>. Save changes.
6. Disconnect ICOM network cable and obd
7.Don’t use network cable and connect ICOM to obd again,then icom A2 running system,
wait and you will see ICOM wlan led is blinking,Led stop and on,ICOM is connected to WiFi ok.

Tags: , , , ,

Leave a Reply