Menu

How to use Ktag 7.020 for Benz Mercedes GL350 EDC17CP46

0 Comment

How to use KTAG 7.020 Chip-tuning Tool Program Mercedes Benz GL350 3.0CDi 249 Hp 2015

KTAG 7.020 Master is the new generation KTAG Master Kit for all the ECU that need to be programmed with Jtag, BDM and Boot protocols(tricore and ST10) and you can use 2017 Newest LED BDM Frame With 4 Probe Pens Full Set together to simple your disassemble job.

Car: Mercedes Benz GL350 3.0CDi 249 Hp 2015

ECU: Bosch EDC17CP46 IROM TC 1797

A completely new GL came to Chemists 2 to add power.
The machine is 2015 year of release, mileage is 500 km.

Ktag 7.020 firmware master

KTAG 7.020 Ksuite V2.23 Master Version FAQ Guide

EURO RED KTAG 7.020 EURO FW 7.020 KTAG FULL

Ktag 7.020 Ksuite 2.23 Tested 100%

Good feedback high quality Ktag 7.020

To work on increasing the power, you must remove the computer, which is located under the locker of the right wheel.

The firmware is produced in the “on the table” mode by the professional ECU programmer KTag firmware 7.020.
ECU – Bosch EDC17CP46 IROM TC 1797, protocol Mercedes GPT (p691)

Work duration: 3-5 hours

The approximate increase in power is 40-45 hp, the torque is 100-120 nm.

K-Tag Ktag 7.020 RED PCB EURO Online Version No Token Limited New Case Version

Opinions on New Design Red KTAG 7.020

 

=======================
E-mail:buyobd@gmail.com
Skype:Marshall.obd2
Whatsapp:86-13476108995

Website : www.buyobdii.com

=======================

 

 

Tags: , , ,

Leave a Reply